Reading a putt

Every putt breaks toward the low side. Break 2 measures the slope under your ball and turns it, with the distance and the green speed, into how much it breaks and where to start it.

Break 2 on a putting green, showing the slope

How to read one

What makes a putt break

A ball rolling across a slope curves toward the low side. How far it curves depends on three things: how steep the slope is, how fast the green is, and how long the putt is. A faster green or a longer putt gives the slope more time to act, so the ball curves more.

1. Set the distance and the green speed

Tell Break 2 how long the putt is, from 1 to 40 ft, and how fast the green is, from 6 to 15 on the Stimpmeter. Both come first on its settings strip.

2. Set it down behind the ball

Put Break 2 just behind your ball, pointing at the hole. Its notch fits around the ball. It measures the slope it sits on, side to side and up or down the line.

3. Read the screen

On the left, how much the putt breaks as a percentage and where to aim, in feet and inches or in cups. In the middle, the line to start the putt on, drawn on a ruler in degrees. On the right, the distance, the green speed and the slope.

4. Putt on the start line, firm

Every read is for a ball that would finish about 1 ft past the hole if it missed: firm enough to hold its line. Start the ball on the line Break 2 shows, at that pace.

Long putts and double breakers

When the slope changes along the way, use Multi-point: read spots along the line and tap at each one. Break 2 joins them into one read, weighting each spot by where the ball meets it.

Learning to see it yourself

Trainer asks for your read first, then shows Break 2's, so you can see how close you were and train your eye for the course.